Circuits
Showing 61–120 of 120 results
-
RC Absorption Circuit Module Relay Contact Protection Resistance Surge Board
RC Absorption Circuit Module Relay Contact Protection Resistance Surge AC/DC 5V-400V Snubber Board Description: RC absorption circuit is also called RC Snubber circuit. It is a circuit structure in which resistors and capacitors are connected in series and connected in parallel with switching devices. It is used to improve the voltage and current waveforms of electronic power devices when they are turned on and off. The RC absorption circuit module can prevent the induced electromotive force generated at the moment of turning on and off of the inductive load from causing damage to the switching devices such as relays [...]
Sale! 40.50 $ Add to cart -
SW-420 Normally Closed Vibration Sensor Module for Alarm System Smart Vehicle Robot Helicopter Airplane Aeroplane Boart Car
Sale! 41.63 $ Add to cart -
HW-882 2S 3A 7.4V 8.4V 18650 Lithium Battery Charger Protection Board BMS Module
HW-882 2S 3A 18650 Li-ion Lithium Battery Charger Protection Board BMS Module 7.4V 8.4V Feature: 2S 7.4V/8.4V 18650 lithium battery protection board, suitable for protecting two rechargeable li-ion/lithium polymer batteries in series from overcharge and overdischarge. Specification: Charging voltage: 8.4V-9V Maximum working current: 3A Maximum instantaneous current: 5A Quiescent current: less than 3uA Internal resistance: less than 45mΩ Over-discharge voltage range: 2.3-3.0V ±0.05V Overcharge voltage range: 4.25-4.35V ±0.05V Short circuit protection: it can be protected and needs to be recharged Product size: 36 x 6 x 2mm Product weight: 3g Packing size: 50 x 50 x [...]
Sale! 40.46 $ Add to cart -
40W/100W bluetooth amplifier (2/4ch) SSM3302 SSM3582
This amplifier board using ADI's class-D amplifier SSM3302, plus DSP ADAU1701 for EQ, crossover, limit, volume control etc. the optional boards are: 4 x 10W SSM3302 x 2 2 x 20W SSM3302 x 2 IN MONO 4 x 25W SSM3582 x 2 All board support analog in besides Bluetooth in mode also. There is a volume controller on the board, you can change the whole input volume. The output mode/EQ/crossover setting can be customized as you liked, please let me know if you want. The default setting is just 2ch in and copied to 4 ch out, my default EQ [...]
108.91 $ Add to cart -
2S-6S Lithium Battery Balanced Charger Expansion JST XH Adapter Board for MEGA Power 860 960 RC Lipo Battery Charging
2S-6S Lithium Battery Balanced Charger Expansion JST XH Adapter Board for MEGA Power 860 960 RC Lipo Battery Charging Specification: JST XH Balance Charging Adapter 6S Expansion Board Support 2S-6S lithium battery Suitable for MEGA Power 860 and 960 chargers Dimensions: 60 x 25 x 15mm Note: Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! Please allow 1-2cm measuring deviation due to manual measurement. 1 X Battery [...]
Sale! 41.14 $ Add to cart -
iFlash Dual Micro SD TF Card Adapter For iPod Classic Video SSD Replaceme MK8022GAA HS12YHA HS081HA MK1634GAL MK1231GAL HDD IPC
Details: You are buying Micro SD card Double Adapter, which will allow you to convert your iPod Video 5th/5.5th Gen and iPod Classic 6th/6.5th/7th Gen from using a hard drive to using Micro sd card Double Adapter Sell products : 1 X iFlash Double Adapter which + 1 X tools + 1X Hard Disk Connect Flex Ribbon Cable Advantages:No need to change the thick back shell For those seeking solid state storage capabilities for their iPod, the allows you to install and use micro sd cards. With much lower power consumption than the original Hard drive, longer run times and quicker user interface. [...]
104.53 $ Add to cart -
HW-882 2S 3A 18650 Li-ion Lithium Battery Charger Protection Board BMS Module 7.4V 8.4V
HW-882 2S 3A 18650 Li-ion Lithium Battery Charger Protection Board BMS Module 7.4V 8.4V Feature: 2S 7.4V/8.4V 18650 lithium battery protection board, suitable for protecting two rechargeable li-ion/lithium polymer batteries in series from overcharge and overdischarge. Specification: Charging voltage: 8.4V-9V Maximum working current: 3A Maximum instantaneous current: 5A Quiescent current: less than 3uA Internal resistance: less than 45mΩ Over-discharge voltage range: 2.3-3.0V ±0.05V Overcharge voltage range: 4.25-4.35V ±0.05V Short circuit protection: it can be protected and needs to be recharged Product size: 36 x 6 x 2mm Product weight: 3g Packing size: 50 x [...]
Sale! 40.59 $ Add to cart -
2S-6S Lithium Battery Balanced Charger Expansion JST XH Adapter Board for MEGA Power 860 960 RC Lipo Battery Charging
2S-6S Lithium Battery Balanced Charger Expansion JST XH Adapter Board for MEGA Power 860 960 RC Lipo Battery Charging Specification: JST XH Balance Charging Adapter 6S Expansion Board Support 2S-6S lithium battery Suitable for MEGA Power 860 and 960 chargers Dimensions: 60 x 25 x 15mm Note: Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! Please allow 1-2cm measuring deviation due to manual measurement. 1 X [...]
Sale! 41.63 $ Add to cart -
YX-Q01 220V Two-Way Power Automatic Switcher 10A 2 Power Supply 2 In 1 Out Power Failure Conversion Switch Board Module
85-240V 10A Dual AC Power Supply Automatic Switching Controller Module Board for dual AC power automatic switching module. The module can automatically switch between the two power sources.Feature:1. AC power2. Dual power input3. Automatic power switch4. Main power YX-Q01Main power supply voltage: 85V~240V ACBackup power supply voltage: 85V~240V ACLoad current: 10A MAXWorking temperature: -25℃~+85℃Working humidity: 5~95 RHSize: 70 x 48 x 18.5mmTip:1. When the main power supply is out of power, the module automatically switches to the backup power supply; when the main power supply is restored, the module automatically switches to the main power supply.2. At [...]
Sale! 47.26 $ Add to cart -
HDD PCB st desktop hard disk 3.5 circuit board No.: 100291893
most hdd boards have the unique biosrom or nvram chip which includes the unique data to access the hdd system area. if the bios information is not compatible with your hdd, there is no way to read the hdds data. because of this, we should use the original pcbs bios when we swap pcb. bios chip swapping is a must. before you purchase, please read: 1 this is just a pcb printed circuit boards, not the whole hard drive; 2 pcb board number is printed on the board, not on the sticker; 3 these boards are used, not brand [...]
Sale! 61.24 $ Add to cart -
Motor Speed Controller Module Adjustable Voltage Regulator Adjustable Speed Regulator Control Governor Switch
U.S. buyer attention: The areas where the US warehouse does not deliver goods are: Hawaii, Alaska, Puerto Rico, Guam and other US overseas territories. And the military address. Spanish buyers attention: if your address includes following postal code please do not choose the Spanish warehouse. The zip code starts with 35/38. Overseas warehouse cannot be delivered. 5A 90W PWM Motor Speed Controller Module DC 5V-35V Adjustable Voltage Regulator Governor Switch Specification: Working Voltage: DC 5V-35V Output Current: 0-5A Output Power: 90W Large Quiescent Current: 7μA Standby State PWM Duty Cycle: 1-100 PWM [...]
Sale! 40.79 $ Add to cart -
5pcs TP4056 4.5V-5V 18650 Type-C Lithium Battery Charging Board Charger Module
Feature: Charge protection, prevent the battery overcharge and overdischarge, and automatically control the charging current, better protect the battery. Type-C female base interface, reserved with input voltage welding electricity, convenient for DIY. Specification: Input voltage: 4.5V-5V Maximum charging current: 1000mA Charging cut-off voltage: 4.2V+-1 Battery overdischarge protection voltage: 2.5V /3A Board size: 2.8cm x 1.7cm/1.1 x 0.66 Package weight: 3g Operation Manual: 1. Type-c female base and the power input end of + ~ welding pad position next to it, connect to 5V input voltage. 2. B+ is connected to [...]
Sale! 41.51 $ Add to cart -
NE555 Time Delay Relay Module Timer Relay Switch Board 12V DC 0-60s Adjustable Turn On / Delay Turn Off Switch Module with Timer
Time Adjsutable Delay Relay Module NE555 Timming Timer Relay Control Switch Board 12V DC Feature: Using NE555 IC. The delay range is 60 seconds adjustable. Specification: Working voltage: 12V DC, allowable range 10V-14.5V Suction current: 45mA 12V, 80mA 6V Quiescent current: 5mA Load switching capacity: 10A 250V AC or 10A 30V DC Size: 55mm x 28mm, height <20mm Product weight: 19g Note: There may be slight size deviations due to manual measurement, different measuring methods and tools. The picture may not reflect the actual color of the item because of different photographing light, [...]
Sale! 41.21 $ Add to cart -
Air Solenoid Valves 2V025-08 2 Position 2 Port 1/4" Normally Closed Valv Pneumatic Solenoid Valve 12V 24V 110V 220V Volt
Sale! 50.21 $ Add to cart -
Original New Logic Board Kit for RUNTK 5538TP ZA ZB ZZ RUNTK 5351TP 0055FV RUNTK5351TP ZZ RUNTK5351TP ZA
If you are not sure about the model of the board, please send us a clear picture of the original board. Have a nice day!!Welcome to my store,Please contact me if you meet any question,I will try my best to satisfy you. We specialized in T-con board and other electronic products. We have own factory and a large number of T-con boards to sell, please contact me what model you want and I will give you the best price. [...]
Sale! 47.51 $ Add to cart -
TP5100 2A Charging Board Power Module Single Dual Battery Charging Management
Description: 1. The TP5100 is a switching step-down dual section 8.4v/single section 4.2v lithium battery charging management chip. Its QFN16 subcompact package and simple peripheral circuits make the TP5100 ideal for high-current charging management applications in portable devices. 2. Meanwhile,TP5100 has built-in input overcurrent, undervoltage protection, chip overtemperature protection, short-circuit protection, battery temperature monitoring and battery reverse connection protection. 3. The TP5100 has a wide input voltage of 5v-18v, and the battery charging is divided into three stages: trickle precharging, constant current and constant voltage. The [...]
Sale! 40.74 $ Add to cart -
2S 3A 7.4V 8.4V 18650 Lithium Battery Charger BMS Protection Board HW-882 for Protecting Two Rechargeable Li-ion/lithium Polymer
HW-882 2S 3A 18650 Li-ion Lithium Battery Charger Protection Board BMS Module 7.4V 8.4VFeature:2S 7.4V/8.4V 18650 lithium battery protection board, suitable for protecting two rechargeable li-ion/lithium polymer batteries in series from overcharge and voltage: 8.4V-9VMaximum working current: 3AMaximum instantaneous current: 5AQuiescent current: less than 3uAInternal resistance: less than 45mΩOver-discharge voltage range: 2.3-3.0V ±0.05VOvercharge voltage range: 4.25-4.35V ±0.05VShort circuit protection: it can be protected and needs to be rechargedProduct size: 36 x 6 x 2mmProduct weight: 3gPacking size: 50 x 50 x 10mmGross weight: 3gNote:There may be slight size deviations due to manual measurement, different measuring methods and tools.The [...]
Sale! 40.59 $ Add to cart -
LILYGO® TTGO T-Display ESP32 Development Board WiFi Bluetooth 1.14 Inch ST7789V IPS LCD Wireless Controller Module For Arduino
Sale! 59.78 $ Add to cart -
2S-6S B6 B8 A6 Lithium Battery Balanced Charger Expansion JST XH Adapter Board
2S-6S Lithium Battery Balanced Charger Expansion JST XH Adapter Board for MEGA Power 860 960 RC Lipo Battery Charging Specification: JST XH Balance Charging Adapter 6S Expansion Board Support 2S-6S lithium battery Suitable for MEGA Power 860 and 960 chargers Dimensions: 60 x 25 x 15mm Note: Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! Please allow 1-2cm measuring deviation due to manual measurement. 1 X [...]
Sale! 41.34 $ Add to cart -
YAOGREENHAM jumbospot V1.3 MMDVM_HS_Dual_Hat Duplex Hotspot Board kit With USB Port Support P25 DMR YSF NXDN For Raspberry pi
New arrival :If you want to buy the finished MMDVM hotspot power bank ,please click this link The default bit error rate is less than 5, and the default offset is 0. If the bit error rate is more than 5, as long as the signal can be received, it can be corrected by offset. 1.Latest version V1.3, and the firmware is latest 2. original cystal : Original from USA Duplex variant of MMDVM_HS_Hat This PCB uses the MMDVM_HS . It has two ADF7021 onboard and allows for duplex operation with two [...]
Sale! 85.70 $ Add to cart -
Field Effect Transistor Switch Module Trigger Switch Module PMOS Field Effect Transistor 3V 5V 12V 24V 36V
U.S. buyer attention: The areas where the US warehouse does not deliver goods are: Hawaii, Alaska, Puerto Rico, Guam and other US overseas territories. And the military address. Spanish buyers attention: if your address includes following postal code please do not choose the Spanish warehouse. The zip code starts with 35/38. Overseas warehouse cannot be delivered. F5305S PMOS Pulse Trigger Switch Board FET MOS Field Effect Transistor Switch Module 3V 5V 12V 24V 36V Feature: 1. Field effect transistor switch module, input and output are completely isolated. 2. Signal trigger terminal: digital [...]
Sale! 40.90 $ Add to cart -
TDA2822M Digital Power Amplifier Board 2×1.5W TDA2822M Digital Power Amplifier Board 2-Channel Power Amp Module
TDA2822M Digital Power Amplifier Board 2x1.5W 2.0-Channel Stereo Audio Power Amp Module Specification: Rating: 1W x 2 1-3 inch speaker Mximum power: 1.5 W x 2 0.2-5 W can meet the speakers Speaker impedance: 4-32 Ω Power amplifier ratio: ≥50 db Distortion: 0.1 Input interface: 3 p wiring jokes Adjust the form: volume adjustment Input voltage: DC 1.8-12V Product size: 63 x 29 x 23mm/2.48 x 1.14 x 0.91 Product weight: 25g Packing size: 100 x 50 x 30mm/3.94 x 1.97 x 1.18 Gross weight: 25g Instructions for use: 1. Connect the speakers The speakers at both ends of [...]
Sale! 41.59 $ Add to cart -
RC Absorption/Snubber Circuit Module Relay Contact Protection Resistance Surge Electromagnetic Anti-Interference Module
RC Absorption Circuit Module Relay Contact Protection Resistance Surge AC/DC 5V-400V Snubber Board Description: RC absorption circuit is also called RC Snubber circuit. It is a circuit structure in which resistors and capacitors are connected in series and connected in parallel with switching devices. It is used to improve the voltage and current waveforms of electronic power devices when they are turned on and off. The RC absorption circuit module can prevent the induced electromotive force generated at the moment of turning on and off of the inductive load from causing damage to the switching [...]
Sale! 40.53 $ Add to cart -
TP5100 Charging Circuit Board 4.2V 8.4V Dual Single Lion Battery Charger Module
Description: 1. The TP5100 is a switching step-down dual section 8.4v/single section 4.2v lithium battery charging management chip. Its QFN16 subcompact package and simple peripheral circuits make the TP5100 ideal for high-current charging management applications in portable devices. 2. Meanwhile,TP5100 has built-in input overcurrent, undervoltage protection, chip overtemperature protection, short-circuit protection, battery temperature monitoring and battery reverse connection protection. 3. The TP5100 has a wide input voltage of 5v-18v, and the battery charging is divided into three stages: trickle precharging, constant current and constant voltage. [...]
Sale! 40.70 $ Add to cart -
IP2368 Bidirectional 100W Fast Charging Module Buck-Boost Type-C Interface Lithium Battery Power Fast Charging Board
body { font-size: 75; color: #000; font-family: Open line-height: 1.3; } dl { margin: 0px; width: 480px; float: left; } dt { width: 100px; height: 15px; float: left; } dd { width: 240px; height: 15px; float: left; } dl dt { margin: 0px; line-height: 22px; color: #474747; font-size: 14px; font-family: tahoma; } #product-desc { width: 100; height: 209px; } #description { width: 100; height: 50; [...]
Sale! 64.20 $ Add to cart -
HW-425 Bluetooth-compatible Audio Receiver Module Bluetooth-compatible 4.2 Wireless HiFi Stereo Lossless MP3 Music Decoder Board
HW-425 Bluetooth-compatible Audio Receiver Module Bluetooth-compatible 4.2 Wireless HiFi Stereo Lossless MP3 Music Decoder Board Feature: Accurate cutouts and interfaces ensure that they fit perfectly in the installation location. Easy installation. Made of high-quality materials, corrosion-resistant, wear-resistant, durable and long service life. Professional chipset can provide excellent system performance. Low power consumption, support Bluetooth-compatible 4.2 transmission, two-channel stereo lossless playback. After the module is connected with Bluetooth, it can quickly sense the wireless transmission of Bluetooth, which is very easy to use. In an open space, the Bluetooth-compatible connection distance can reach up to 20 meters. It is [...]
Sale! 41.00 $ Add to cart -
Bluetooth 4.1 Audio Receiver Board Bluetooth Stereo MP3 Lossless Decoder Module
Bluetooth-compatible Audio Receiver Board Bluetooth-compatible 4.1 MP3 Lossless Decoder Wireless Stereo Music Module Feature: Support Bluetooth-compatible 4.1, support automatic re-connection function, support WAV+APE+FLAC+MP3 lossless decoding, stereo output. Specification: Power Supply: 3.7V-5V SNR: 90dB THD+N: -70dB Crosstalk: -86dB DNR: 91dB Supported Profile: LOS: >15m USB power supply: Universal Micro USB 5V power supply 3.7V-5V power supply PCB: realize external 3.7V-5V lithium battery power supply LED indicator: blue light is on when 3.5mm audio output interface: standard 3.5mm interface, stereo sound output, earphones can be inserted, power amplifier and other equipment can be connected Color: Red/White [...]
Sale! 41.39 $ Add to cart -
Original 6870C-0266A placa de video Logic Board kit for / 32LH30RC-TA LC320WUN Connect with T-CON Connect Board
If you are not sure about the model of the board, please send us a clear picture of the original board. Have a nice day!!Welcome to my store,Please contact me if you meet any question,I will try my best to satisfy you. We specialized in T-con board and other electronic products. We have own factory and a large number of T-con boards to sell, please contact me what model you [...]
Sale! 47.90 $ Add to cart -
6in10out ADAU1467 / 1463 Core Board (NEW!)
Note:MIDIWORX is the original design company for this product! MediaWorks / MediaWorx is our former name/logo used before. Now we'll start changing to / use this new LOGO and Brand as they are formally registered. ADAU1463/1467 is the latest and powerful digital audio DSP SIGMADSP/SIGMA350 chip introduced by ADI from 2017. It integrates 32-bit single precision/64-bit double precision audio DSP core, SPDIF Tx/Rx, Aux ADCs, IIC + SPI, GPIO, I2S in & out, etc. , Has been widely used in car audio, professional audio or consumer audio products. ADAU1463/1467 is a fully programmable DSP. Its development adopts the pure graphical [...]
120.66 $ Add to cart -
TDA2822M Mini 2.0 Channel 1W*2 Stereo Audio Power Amplifier Board DC 5V 12V CAR sound Amplifiers module
TDA2822M Digital Power Amplifier Board 2x1.5W 2.0-Channel Stereo Audio Power Amp Module Specification: Rating: 1W x 2 1-3 inch speaker Mximum power: 1.5 W x 2 0.2-5 W can meet the speakers Speaker impedance: 4-32 Ω Power amplifier ratio: ≥50 db Distortion: 0.1 Input interface: 3 p wiring jokes Adjust the form: volume adjustment Input voltage: DC 1.8-12V Product size: 63 x 29 x 23mm/2.48 x 1.14 x 0.91 Product weight: 25g Packing size: 100 x 50 x 30mm/3.94 x 1.97 x 1.18 Gross weight: 25g Instructions for use: 1. Connect the speakers The [...]
Sale! 41.56 $ Add to cart -
9V/12V/24V to 5V 3A CAR USB Charger Module DC-DC Step Down Car Charging Converter 3A Output 12v 5v power supply module Pcb Board
DC-DC 9V/12V/24V to 5V Step Down Charger Power Module 3A Output USB Car Charging Regulator Buck Voltage Board Descriptions: A switching step-down DC-DC converter module; Fixed switching frequency 150KHz, the chip has excellent linearity adjustment and load regulation, fixed output 5V. The chip integrates reliability modules such as overcurrent protection, overtemperature protection, and short circuit shutdown. Specifications: Input: 5V-36V Output: 5V/3A Conversion Efficiency: 96 Switching Frequency: 150KHz Working Temperature: -40°C-+85°C Load Capacity: Maximum Output 3A, Long-Term Work 2A Product Size: 38 X 16 X 5mm/1.5 X 0.63 X [...]
Sale! 40.71 $ Add to cart -
A-BF Infrared Thermal Imager RX-350 PCB Circuit Floor Heating Pipe Electronic Detection HD Handheld Thermal Imaging Camera
Sale! 276.61 $ Add to cart -
Super XL6009 DC-DC Boost Buck Step-up Bown Converter Solar Voltage Module
Super XL6009 DC-DC Boost Buck Adjustable Step-up Bown Converter Solar Voltage Module Board Feature: 1. When the car starts, the voltage will be pulled down to less than 7V or smaller, and the voltage of the engine will be as high as 15V or higher at high speed. 2. The automatic step-up and step-down module solves the problem that it is difficult for a 12V electrical appliance to work normally. The output can be stabilized at 12V regardless of the input voltage being 5V, 12V or 32V. 3. Ultra-wide input voltage 5V-32V. 4. Ultra-wide output [...]
Sale! 41.49 $ Add to cart -
Air Compressor Pressure Valve Switch Manifold Relief Regulator Gauges 90-120PSI 230-220V Aluminum alloy bracket
Aluminum alloy Air Compressor Pressure Valve Switch Manifold Relief Regulator Gauges 125 PSI 230 Durable and practical. Easy to install and remove.The main function of the clique is to adjust the air compressor to close and start the pressure.Users can adjust according to their actual situation.The air regulator on both sides of the copper is an exhaust clique that opens the gas when used.Right red is the safety aluminum, plasticColor: as shownRated voltage: 220vExhaust pipe: about 6MMBracket joint size: about 20MMOuter pressure relief port: about 9.5MMMaximum current: 20AWorking pressure: 5-8KG 90-120 PSISwitching pressure range: 0.5-0.8MPA 5-8BAR 90-120PSImethod: normally closedSize: [...]
Sale! 67.91 $ Add to cart -
5pcs TP4056 Lithium Battery Charger Module DIY Board with Type-C Feame Interface
Feature: Charge protection, prevent the battery overcharge and overdischarge, and automatically control the charging current, better protect the battery. Type-C female base interface, reserved with input voltage welding electricity, convenient for DIY. Specification: Input voltage: 4.5V-5V Maximum charging current: 1000mA Charging cut-off voltage: 4.2V+-1 Battery overdischarge protection voltage: 2.5V /3A Board size: 2.8cm x 1.7cm/1.1 x 0.66 Package weight: 3g Operation Manual: 1. Type-c female base and the power input end of + ~ welding pad position next to it, connect to 5V input voltage. 2. B+ is connected to the positive electrode of [...]
Sale! 41.56 $ Add to cart -
100% tetsted Work and Equipment Power Support Board BN44-00787A Samsung L58GFB ESM for Ua58j50swajxxz/ua58h5288aj
Sale! 84.03 $ Add to cart -
FanYingSonic 200W Power Ultrasonic Driver Board Ultrasound Cleaner Generator Circuit Display Boards Cleaning Machine Auto Washer
FanYingSonic Ultrasonic Cleaner Power Driver Board Ultrasound Generator Circuit Motherboard Cleaning Machine Auto Washer 200W. Features and specifications: Product size: 115mm x 115mm Support Power: 200W Support Heating Power: 600W frequency: offer 40KHz or 28KHz Friendly reminder: please choose the correct frequency, we will ship the frequency according to you choose, thank you The driverboard can connect 4pcs transducer50W Customized Frequency, welocme OEM / ODM Package included: 1 x Ultrasonic Cleaner Motherboard 1 x Board Ultrasonic transducer is [...]
Sale! 147.69 $ Add to cart -
3.3V Wireless Socket Module Adapter Plate 8Pin 24L01 Smart Electronic Board
3.3V Wireless Socket Module Adapter Plate Board 8Pin 24L01 Smart Electronics Module Feature: The working voltage of wireless module is generally 3.3v, while that of 51 single-chip computer is 5V. This module is convenient for the cooperation between wireless module and 51 single-chip computer system board. Specification: Pin value: 8Pin Product size: 25 x 18 x 9mm/0.98 x 0.7 x 0.35 Product weight: 2g Note: Please allow 1-3mm differs due to manual measurement. Due to the different display and different light, the picture [...]
Sale! 41.63 $ Add to cart -
TP5100 Double Single Lithium Battery Charge Management Compatible 2A Rechargeable Llate 18650 4.2V 8.4V Built-in power MOSFET
Description: 1. The TP5100 is a switching step-down dual section 8.4v/single section 4.2v lithium battery charging management chip. Its QFN16 subcompact package and simple peripheral circuits make the TP5100 ideal for high-current charging management applications in portable devices. 2. Meanwhile,TP5100 has built-in input overcurrent, undervoltage protection, chip overtemperature protection, short-circuit protection, battery temperature monitoring and battery reverse connection protection. 3. The TP5100 has a wide input voltage of 5v-18v, and the battery charging is divided into three stages: trickle precharging, constant current and constant voltage. The trickle precharging current [...]
Sale! 40.65 $ Add to cart -
Trigger Switch Board MOS Field Effect Transistor 3V 5V 12V 24V 36V Transistor Switch Module Automation Circuit
F5305S PMOS Pulse Trigger Switch Board FET MOS Field Effect Transistor Switch Module 3V 5V 12V 24V 36V Feature: 1. Field effect transistor switch module, input and output are completely isolated. 2. Signal trigger terminal: digital high and low level. Can be connected to MCU IO port, PLC interface, DC power supply, etc., 3. Input signal voltage: 3V~24V; current: about 5mA. 4. The output terminal can control high-power equipment, motors, bulbs, LED strips, DC motors, micro water pumps, solenoid valves, etc. 5. Output controlled voltage: 5V~36V. Current: less than 5A, more than 5A need to add a heat sink, [...]
Sale! 40.90 $ Add to cart -
DC-DC Step-UP Power Module 2-24V to 2-28V SX1308 Voltage Boost Adjustable Board
DC-DC 2-24V to 2-28V Step-UP Power Module SX1308 2A Adjustable Voltage Boost Converter Board Features: Oscillation frequency 1.2MHz, efficiency is as high as 95 Circuit has short circuit protection, overheating protection function. 10k to adjust potentiometer, adjust the output voltage. Description: 1: VIN cathode voltage input 2: GND anode voltage input 3: GND anode voltage input 4: OUT cathode voltage output, the 2 GNDs are intercommunicated, and the pads of the four voltage input/output terminals are 4mm x 4mm pads, and the through hole diameter is 1mm. 5: 10K adjust potentiometer, choose the output voltage [...]
Sale! 40.46 $ Add to cart -
6V 12V 24V DC Car Truck Voltage Circuit Tester Digital Display Long Probe Pen Light Bulb Automobile Diagnostic Tools Auto Repair
6V 12V 24V DC Car Truck Voltage Circuit Tester Digital Display Long Probe Pen Light Bulb Automobile Diagn Dear friend, due to different arrival batches, the metal parts are white and black. Those who care should buy carefully. Product Description:This probe pen is ideal for checking circuits, fuses, switches and wiring on automobiles, trailers, boats, motorcycles and other low voltage systems. Connect the alligator clamp to the ground, then take the probe to test circuit. If the indicator light is on, there is is made of plastic and the hardened & tempered carbon steel probe is chrome [...]
Sale! 50.93 $ Add to cart -
WD Digital desktop hard disk PCB 2060 800068 001 Rev P1 measured NEW
most hdd boards have the unique biosrom or nvram chip which includes the unique data to access the hdd system area. if the bios information is not compatible with your hdd, there is no way to read the hdds data. because of this, we should use the original pcbs bios when we swap pcb. bios chip swapping is a must. before you purchase, please read: 1 this is just a pcb printed circuit boards, not the whole hard drive; 2 pcb board number is printed on the board, not on the sticker; 3 these boards are used, not brand [...]
Sale! 64.20 $ Add to cart -
DC-DC 600W 10-60V to 12-80V Boost Converter Step-up Notebook Power Supply Module
Specification: Input voltage: 12V-60V Input current: maximum input current 15A Output voltage: 12v-80v continuously adjustable Output current: maximum output current 10A adjustable Output power: effective power P = input voltage V x 10A Conversion efficiency: up to 95 input voltage and current; output voltage and current affect conversion efficiency Short circuit protection: fuses Module size: 73 x 51 x 32mm/2.87 x 2 x 1.25 Weight: 177g Module nature: non isolated boost module boost Input voltage: 12-60VDC input for wide input voltage range applications Input current: 15A max over 10A, please strengthen heat dissipation Static working current: 15mA [...]
Sale! 53.50 $ Add to cart -
High Quality Delay Relay Delay Turn On / Delay Turn Off Switch Module with Timer DC 12V Time Adjsutable Delay Relay Module
Time Adjsutable Delay Relay Module NE555 Timming Timer Relay Control Switch Board 12V DC Feature: Using NE555 IC. The delay range is 60 seconds adjustable. Specification: Working voltage: 12V DC, allowable range 10V-14.5V Suction current: 45mA 12V, 80mA 6V Quiescent current: 5mA Load switching capacity: 10A 250V AC or 10A 30V DC Size: 55mm x 28mm, height <20mm Product weight: 19g Note: There may be slight size deviations due to manual measurement, different measuring methods and tools. The picture may not reflect the actual color of the item because of different photographing light, angle and [...]
Sale! 41.44 $ Add to cart -
HW-425 Bluetooth-compatible Audio Receiver Module Bluetooth-compatible 4.2 Wireless HiFi Stereo Lossless MP3 Music Decoder Board
HW-425 Bluetooth-compatible Audio Receiver Module Bluetooth-compatible 4.2 Wireless HiFi Stereo Lossless MP3 Music Decoder Board Feature: Accurate cutouts and interfaces ensure that they fit perfectly in the installation location. Easy installation. Made of high-quality materials, corrosion-resistant, wear-resistant, durable and long service life. Professional chipset can provide excellent system performance. Low power consumption, support Bluetooth-compatible 4.2 transmission, two-channel stereo lossless playback. After the module is connected with it can quickly sense the wireless transmission of which is very easy to use. In an open space, the Bluetooth-compatible connection distance can reach up to 20 meters. It [...]
Sale! 41.15 $ Add to cart -
6V 12V 6A PWM No-Polarity DC Motor Speed Governor High Power Speed Controller
DC 6V 12V 6A PWM No-Polarity Motor Speed Controller Module High Power Motor Speed Regulator Governor Control Switch Feature: 1. High-quality speed control switch, with switch DC speed controller; 2. DC 6-12V input working voltage; 3. 6A stable working current; 4. The speed adjustment range is 0-100 of the original speed; Specification: Product size: 51 x 37 x 26mm/2.01 x 1.46 x 1.02 Notice: 1. The input of the DC motor speed controller is direct current, and it cannot be directly connected to alternating [...]
Sale! 41.30 $ Add to cart -
ZV-446 / T2805310400 Beko Washing Machine Replacement Parts Electronic Delay Door Lock Interlock Switch Assembly
Sale! 51.36 $ Add to cart -
5pcs Mini360 RC Airplane Module Mini 360 DC Buck Converter 2A Step Down 4.75V-23V to 1V-17V 17x11x3.8mm LM2596
Small volume DC-DC synchronous rectifier step-down module Application fields: DIY mobile power supply, vehicle power supply, communication equipment power supply, various occasions with strict requirements on volume and weight such as aviation model, etc.. Technical parameters: Model name Mini360 Ultra small volume DC-DC synchronous rectifier step-down module Module properties Non isolated Depressurization Rectification mode Synchronous rectification input voltage 4.75V-23V output voltage 1.0V-17V Output current Peak 3a, long time 1.8A conversion efficiency 96 high switching frequency 340KHz Output ripple 30mV when no load Load adjustment rate ± 0.5 Voltage adjustment rate± 2.5 working temperature-40 ° C to +85 ° C [...]
Sale! 43.50 $ Add to cart -
Tuya Smart Life 3 Phase Wifi Energy KWH Meter 80A 120A Power Clamp Current Transformer App Monitor
Support Dropshipping and Wholesaling. 100 Original and Good Quality with Free After-sale Warranty. 1. It's high Amp item, and the device needs certified and professional electrician for wiring.2.The frequency of the wireless router is 2.4GHz.3. The meter requires the measured device must have neutral wire. otherwise it can't measure the device's voltage, current, and power.Material: plasticcolour: As shownPackage Contents:1 x 3 Phase WiFi Energy KWH Meter80A/1 x 3 Phase WiFi Energy KWH Meter120AOnly the above package content, other products are not included.Note: Light reflection and different displays may cause the color of the item in the picture a [...]
Sale! 135.00 $ Add to cart -
ESP32 LoRa32 V2.1 1.6 Version 433/868/915MHZ LoRa ESP-32 OLED SX1276 ESP32 Oled-display BT Wireless WIFI Lora development board
TTGO LORA32 868/915Mhz 433MHz SX1276 ESP32 Oled-display BT Wireless WIFI Lora development board Adapter Board Features: 1.The antenna needs to be in connection with the IPEX interface if the antenna is not connected, the signal reception will be unstable 2.Lithium battery charge and discharge circuit, when the battery is full, the blue LED will stop working. When using, pay attention to the positive and negative of the battery, otherwise it will be damaged! 3.With IO port touch screen touch signal input, you need to add the 100nF pull-down capacitor to this pin 4.Support for Sniffer software protocol analysis, Station, [...]
Sale! 85.51 $ Add to cart -
F5305S PMOS Field Effect Transistor Pulse Trigger Switch Board 3V 5V 12V 24V 36V
F5305S PMOS Pulse Trigger Switch Board FET MOS Field Effect Transistor Switch Module 3V 5V 12V 24V 36V Feature: 1. Field effect transistor switch module, input and output are completely isolated. 2. Signal trigger terminal: digital high and low level. Can be connected to MCU IO port, PLC interface, DC power supply, etc., 3. Input signal voltage: 3V~24V; current: about 5mA. 4. The output terminal can control high-power equipment, motors, bulbs, LED strips, DC motors, micro water pumps, solenoid valves, etc. 5. Output controlled voltage: 5V~36V. Current: less than 5A, more than 5A need to add a heat sink, [...]
Sale! 40.89 $ Add to cart -
3.3V Wireless Socket Module Adapter Plate 8Pin 24L01 Smart Electronic Board
3.3V Wireless Socket Module Adapter Plate Board 8Pin 24L01 Smart Electronics Module Feature: The working voltage of wireless module is generally 3.3v, while that of 51 single-chip computer is 5V. This module is convenient for the cooperation between wireless module and 51 single-chip computer system board. Specification: Pin value: 8Pin Product size: 25 x 18 x 9mm/0.98 x 0.7 x 0.35 Product weight: 2g Note: Please allow 1-3mm differs due to manual measurement. Due to the different display and different light, the picture may not show the actual color of the item. Thanks [...]
Sale! 40.25 $ Add to cart -
Time Adjsutable Delay Relay Module NE555 Timming Timer Relay Control Switch Board 12V DC Delay Module Relay Module
Time Adjsutable Delay Relay Module NE555 Timming Timer Relay Control Switch Board 12V DC Feature: Using NE555 IC. The delay range is 60 seconds adjustable. Specification: Working voltage: 12V DC, allowable range 10V-14.5V Suction current: 45mA 12V, 80mA 6V Quiescent current: 5mA Load switching capacity: 10A 250V AC or 10A 30V DC Size: 55mm x 28mm, height <20mm Product weight: 19g Note: There may be slight size deviations due to manual measurement, different measuring methods and tools. The picture may not reflect the actual color of the item [...]
Sale! 41.33 $ Add to cart -
2S-6S B6 B8 A6 Lithium Battery Balanced Charger Expansion JST XH Adapter Board
2S-6S Lithium Battery Balanced Charger Expansion JST XH Adapter Board for MEGA Power 860 960 RC Lipo Battery Charging Specification: JST XH Balance Charging Adapter 6S Expansion Board Support 2S-6S lithium battery Suitable for MEGA Power 860 and 960 chargers Dimensions: 60 x 25 x 15mm Note: Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! Please allow 1-2cm measuring deviation due to manual measurement. [...]
Sale! 41.34 $ Add to cart -
10A 6-60V Battery Charger Control Module Overcharge for PROTECTION Control Switc
Feature:OOTDTY 1.Support Lead-acid battery and Acting Battery,voltage range:6V~60V;2.Can display voltage,percent of battery,charging for TIME at the same for TIME through LCD3.The function is very powerful,realizes the automatic charge control,the control charge for TIME, also may set up and uploads the corresponding parameter through the serial portSpecifications: Product Model:XY-L10AControl accuracy:0.1VOutput Type: Direct OutputVoltage error:±0.1VScope of application: various lithium Charge control function:By setting the volt-HI:‘UP’ the battery voltage is below the volt-LI:’dn’,the relay leads,the charger begins to charge the battery;when the battery voltage is up to volt-HI:’UP’,the relay is diconnected and the automatic charge is completed [...]
Sale! 46.64 $ Add to cart -
9V/12V/24V to 5V DC-DC Step Down Car Charging Car Charger 3A Output USB Charger Module Diy Electronic Diy Kit Pcb Board
DC-DC 9V/12V/24V to 5V Step Down Charger Power Module 3A Output USB Car Charging Regulator Buck Voltage Board Descriptions: A switching step-down DC-DC converter module; Fixed switching frequency 150KHz, the chip has excellent linearity adjustment and load regulation, fixed output 5V. The chip integrates reliability modules such as overcurrent protection, overtemperature protection, and short circuit shutdown. Specifications: Input: 5V-36V Output: 5V/3A Conversion Efficiency: 96 Switching Frequency: 150KHz Working Temperature: -40°C-+85°C Load Capacity: Maximum Output 3A, Long-Term Work 2A Product Size: 38 X 16 X 5mm/1.5 X 0.63 X [...]
Sale! 40.71 $ Add to cart -
UNI-T Infrared Thermal Imager UTi120S PCB Circuit Industrial Testing Floor Heating Tube Testing original genuine Thermal camera
Features ● infrared resolution: 120 × ninety● temperature measurement range: - 20 ~ 400 ℃● temperature measurement mode: center point, high and low temperature tracking● photo storage: 16GB TF Card● high and low temperature alarm: image, beep, LED flashing● laser indication / LED lighting● three prevention design: IP54 / two meter fall prevention● PC analysis software● six palette options● adjustable emissivity● the service time shall not be less than 9 hours● 3.7v/2600mah rechargeable lithium battery● bottom design ¼ Screw holes can be used with tripod Uti120s detailed description 1. WORLDWIDE SHIPPING.Except some countries and APO/FPO2. Orders processed timely after [...]
Sale! 282.00 $ Add to cart -
LILYGO® TTGO T-U2T USB To TTL Automatic Downloader CH340K
LILYGO® T-U2T USB To TTL automatic downloader CH9102Currently only compatible with Windows , Mac systems of 10.15 and below LILYGO T-U2T is the abbreviation of USB To TTL, The original intention of this product design is that every time you design an ESP32 circuit board, you will find that the same circuit of usb To TTL appears on the schematic, especially when designing a small-sized circuit. This circuit occupies a lot of space, and it also increases the cost, so we want to change it, Finally we discovered that each product also [...]
48.09 $ Add to cart -
TP5100 Double Single Lithium Battery Charge Management Compatible 2A Rechargeable Llate 18650 4.2V 8.4V Built-in power MOSFET
Description: 1. The TP5100 is a switching step-down dual section 8.4v/single section 4.2v lithium battery charging management chip. Its QFN16 subcompact package and simple peripheral circuits make the TP5100 ideal for high-current charging management applications in portable devices. 2. Meanwhile,TP5100 has built-in input overcurrent, undervoltage protection, chip overtemperature protection, short-circuit protection, battery temperature monitoring and battery reverse connection protection. 3. The TP5100 has a wide input voltage of 5v-18v, and the battery charging is divided into three stages: trickle precharging, constant current and constant voltage. The trickle precharging current and constant current charging current are adjusted by [...]
Sale! 40.65 $ Add to cart
Showing 61–120 of 120 results