Additional information
Origin | Mainland China |
---|---|
Package | No |
Certification | NONE |
Model Number | F29823 |
Interface Type | PCI Express |
Type | Add On Cards |
42.80 $
51 in stock
Origin | Mainland China |
---|---|
Package | No |
Certification | NONE |
Model Number | F29823 |
Interface Type | PCI Express |
Type | Add On Cards |
Add On Card NVMe M.2 NGFF PCIe SSD Convert Card for late 2013 2014 2015 2017 MacBook Air A1465 A1466 Adapter Card Description:
product description:
Brand: Feichao
Colour: Black
specification:
Size: 23x14mm
Weight: 2g
Features:
To install NVME M.2 SSD, you need to pay attention to the following: First, you must upgrade the mac os to the new version of high sierra 10.13. The upgrade will automatically update the smc and boot rom versions of the mac to support the ssd of nvme. Secondly, you must not use the Macs own network recovery software to install a new hard disk mac os, but to install through the u disk, to make a 10.13.6 U disk Apple tool in advance, in order to identify the new hard disk. In addition to installation Be sure to format the disk to APFS format. If it is formatted as HFS, it will restart in the installation system interface, and then prompt the disk space is insufficient.
This riser card is suitable for converting 2280 22 mm wide and 80 mm wide PCIe x4 M.2 NVME hard drive to 2013 edition 2014 edition 2015 2016 2017 edition Apple MacBook AIR A1465 A1466 and 2013 edition 2014 edition 2015 edition 2016 Vintage Apple MacBook Pro A1398 A1502 and other notebook SSD solid state drives
This riser card + hard drive can replace the original hard drive of the following models:
2013 version MacBook Pro retina A1398 A1502 ME864 ME865 ME866 ME293 ME294,
2014 version MacBook Pro retina A1502 A1398 MGX72 MGX82 MGX92 MGXA2 MGXC2,
2015 version MacBook Pro retina A1502 A1398 MF839 MF840 MF841 MJLQ2 MJLT2,
2013-2014 version MacBook Air A1465 A1466 MD711 MD712 MD760 MD761,
2015 version MacBook Air A1465 A1466 MJVM2 MJVP2 MJVE2 MJVG2 and Mac Pro ME253 MD878, iMAC A1419 Late 2013 and newer.
note:
Apples 10.13 and later systems already support the M.2 NGFF SSD for the NVMe protocol.
The working principle of the adapter card is extremely simple. Just connect a few wires from your original hard disk and reconnect to the hard disk interface of the Apple notebook. There is no need for chip conversion in the middle, so there is no need to drive and it will not change any performance of your hard disk. !
Packaged Include:
1 x adapter card
100x100mm 0.5mm Silicone Thermal Pad Sheet Computer CPU Graphics Chip Heat Sink 0.5mm Thermal Pad Sheet Heat Sink for Computer CPU Graphics Chip 100x100mm Specifications: Size: 100 x 100mm/3.94 x 3.94in Weight: 50g Features: Super soft, a little sticky, good thermal conductivity, easy to cut, feels like plasticine, but has a certain degree of plasticity, super insulation, there is a sense of cool put on the arm! Application: affixed to the graphics card, video memory, Bridge chip, IC controller, power [...]
Sale! 40.33 $ Add to cartFeatures This Copper Shims thermal conductivity up to 401w / mk, and ordinary copper thermal conductivity is only 20-30w / mk CPU and GPU graphics card in the inside part of the laptop using a thermal plastic thermal conductivity, thermal plastic at high temperature for a long time easy to aging, and ultimately lost, leading to overheating of the CPU or GPU, the Laptop will not start after overheating. And this copper heat sink solve thermal problems caused by frequent crashes laptop, etc Package included: 10 pcs Thermal Conductive Copper [...]
Sale! 42.78 $ Add to cartDustproof 120mm Case Fan Dust Filter Guard Grill Protector Cover PC Computer Features: 1. Removable front plate, back plate and middle filter, 2. Sponge Filter - Durable and easy cleaning, 3. Made of plastic ,lightweight Specification: Name: 120mm PC case fan filter dust-proof net Quantity : 1pc, 2pcs, 5pcs Color: Black Material: plastic Suitable for 120 mm x 120 mm PC case fan The size: 126 x 126 x 10 mm Net weight: 47g 1 x PC Case Fan Filter Dust-proof Net [...]
Sale! 40.55 $ Add to cartCHIPAL Black 2.5 skids For SSD to 3.5 Bay caddy tray Hard Drive HDD Metal Mounting Dock Tray Bracket Adapter converter Enclosure 100 brand new and high quality. Product Specification: Device Type: 2.5 to 3.5 Metal Mounting Adaptor Bracket Material: Metal Dimension: Approx.12 x 10 x 1.5cmL x W x T Thickness: About 2.0mm Package Includes: 1 x 2.5 SSD HDD to 3.5 Metal Mounting Adapter Bracket Dock. 8 x Screw. 1. We accept Escrow. You can Pay via Alipay, Visa, MasterCard, Western Union, Qiwi and bank transfer on AliExpress. 2. Please make the payment as soon as posible [...]
Sale! 40.63 $ Add to cartDescription: Product name: Three in one OTG card reader Product material: ABS plastic Size: 5 x 2.8 x 1.3cm, line length: 12cm Product color: Type-C white, Micro black Card slot: TF SD USB2.0 Product features: 3 card slots and 2 interfaces Interface: Micro/Type C Specifications: 1. USB-C to Card Reader: Easy to transfer photos videos and backup data to your MacBook, laptop, smartphone and tablet. 2. Plug & Play: Reads and writes either SD or Micro SD card and USB-A device simultaneously. 3. USB 2.0 Port Extend: The USB C card reader also [...]
Sale! 41.20 $ Add to cartDell H200 IT Mode 6Gbps HBA LSI 9211-8I P20 ZFS FreeNAS unRAID + 2 x SATA Cable Condition: USED Original unit , IT Mode P20 firmware! Cleaned, bracket replaced, flashed with IT firmware, and fully tested with all 8 SAS lanes. H200: Support RAID0,1,10,1E and JBOD. No cache memory real pictures listed. Part Number: 047MCV /00RR9J/0U039M. Product Type RAID CONTROLLER 6Gb/s. Interface SAS, SATA, Two internal miniSAS connectors. Host Interface PCI Express 2.0 Form Factor PLUG IN. IT Mode: Model:LSI SAS9211-8i Controller:LSI SAS 2008 Firmware(FW:HBA IT Mode P20 Data Transfer Rate:6Gbps Host Interface:PCI E 2.0 Internal Connectors:Mini SAS [...]
Sale! 66.75 $ Add to cartFeatures: Universal used in producing PCB board,attach on the PCB surface to make it photosensitive. Suitable for electroplating, hole coveringand etching. Great hole covering ability. High resolution. Great adaptive capacity to differentmaterial. Durable in pH 8.0-8.5 situation. 1.5mil dry film fully covers a 0.25inchheight hole. Suitable for usual plating bath, no wrinkleor color error. Specification: Width: approx. 30 cm/11.81 Length: approx. 100 cm/39.37 OperatingSteps: 1. Remove the cover. 2. Clean the surface, then attachthe film carefully, be sure to make it flat and leave no air. 3. Iron the film slightly to fixit. 4. Print the PCB film to ensureprecision, [...]
Sale! 41.20 $ Add to cartwifi antena wifi repetidor wifi largo alca...точка repeater wifi extender antennaamplificador wifi роутер wifi antena wifi exterior comfast доступа wifi repetidor wifi point wifi point outdoor wifi антенна punto de acceso outdoor access wifi access point wifi wifi access point cpe outdoor antenne wifi wifi антена wifi repeater wifi largo alcance wifi wifi антенна wifi amplificador de point d'accès punto de acceso wifi repetidores de wifi alta ... точки wi fi extender long range مقوي واي فاي wifi largo signal repeater point d acces [...]
Sale! 155.08 $ Add to cartDear: TRONXY 2022 NEWEST 3D PRINTRE Crux1 ,Gemini XS ,VEHO 600 has arrived in RU.UK .US.EU warehouses,24-hour fast delivery CRUX I: Gemini XS: VEHO 600: NOTE: The special price is less than USD 0.01 , each person is limited to 1PC. if you purchase more than 1 , only 1 PC will be issued ,thanks Nozzle TRONXY 1PC MK8 M6 Nozzle J-head Extrusion Nozzle For 1.75mm Filament 3D Printer Copper Nozzle Package include: 1pc nozzle [...]
Sale! 40.09 $ Add to cartThe soft silicone bag allows the baby to pass through the small hole of the food net bag, naturally sucking the health food juice such as fruits and vegetables, not easy to lick or out, and exercise the babys hand ability at the same time. Guide the baby to eat independently, food grade PP material, safe and environmentally friendly, easy to grasp the crank, coordinate with the hand and eye, learn to eat independently Soft silicone bag, environmentally friendly and healthy Ergonomic design, food grade silicone Light weight and small size Easy to carry Durable and practical Material: PP + [...]
Sale! 42.84 $ Add to cartAliexpress Size 2-3T Tags Size 100 Length: 42cm ,Bust:60cm, Sleeve:36cm. Pants: 58cm Fits Height 90-100cm Aliexpress Size 4T Tags Size 110 Length: 44cm ,Bust:64cm, Sleeve:38cm. Pants: 65cm Fits Height 100-110cm Aliexpress Size 5-6T Tags Size 120 Length: 48cm ,Bust:68cm, Sleeve:40. Pants: 71cm Fits Height 110-120cm Aliexpress Size 7T Tags Size 130 Length: 52cm ,Bust:72cm, Sleeve:42cm. Pants: 76cm Fits Height 120-130cm Aliexpress Size 8-9T Tags Size 140 Length: 55cm ,Bust:76cm, Sleeve:44cm. Pants: 82cm Fits Height 130-140cm Aliexpress Size 10-11T Tags Size 150 Length: 58cm ,Bust:80cm, Sleeve:46cm. Pants: 86cm Fits Height 140-150cm Aliexpress [...]
Sale! 44.66 $ Add to cartBreathable cotton fabric for a cozy and comfortable night sleep. Tagless label on the neck gives the most protection to your kids delicate skin. A comfy pullover top and pants with elastic waistband and allover prints, ensure a perfect fit. Suitable for sleep, birthday gift, daily wear, party, indoor or outdoor activities. Machine washable, but hand wash is preferred. [...]
Sale! 55.68 $ Add to cartBaby Bed Organizer Hanging Bags Multifunctional baby crib storage organizer can be equipped with baby clothes, baby care products,baby bed linen, urine pads, baby bottles, tissue box toys, etc. ORZBOW Baby Crib Organizer This versatile baby organizer holds towels,lotion, wipes and clothes within easy reach so you never have to leave your baby's side during diaper changes. The Orzbow Hanging Nursery Organizer is sure to become the most indispensable of crib accessories.It the perfect baby shower gift for all new moms. Product Parameters Product Name:Multifunctional baby crib storage organizer Fabric: PolyesterSize: 26 x 22 x 24cmWeight: 700g Size Inforation [...]
Sale! 66.04 $ Add to cartProduct Name : Baby Crib Storage Bag Crib Organizer Diaper Bag for Baby Bed Pockets : 1 Pocket Material : Fabric is cotton,filling is polyester . Size : About 30 x 33 cm Storage for :Nursing Bottles, Diapers ,Toys ,Baby Products and so on. Note : please allow 2--4cm errors and a little color and pattern difference by the cutting ,thanks for your understanding . [...]
Sale! 49.75 $ Add to cartChcę coś kupić ale szukam informacji jak zamówić... |
Kupiłem coś ale chcę poznać status zamówienia... |
Odebrałem paczkę ale mam pytanie lub problem... |
Chcę dokonać zwrotu i potrzebuję informacji... |
Droptech Sp. z o.o. droptech.polska@gmail.com |
ul. Łódzka 118, Piotrków Tryb. Sprzedajemy tylko przez internet |
NIP: 7712911090 REGON 386758083 |
Wysyłka bezpośrednio od producenta lub dostawcy |
DARMOWA WYSYŁKA + ubezpiecznie dostawy + śledzenie przesyłki |
CAŁKOWITY ZWROT podczas reklamacji |
Reviews
There are no reviews yet.